Publications

Luo, Shezhou; Wang, Cheng; Xi, Xiaohuan; Pan, Feifei (2014). Estimating FPAR of maize canopy using airborne discrete-return LiDAR data. OPTICS EXPRESS, 22(5), 5106-5117.

Abstract
The fraction of absorbed photosynthetically active radiation (FPAR) is a key parameter for ecosystem modeling, crop growth monitoring and yield prediction. Ground-based FPAR measurements are time consuming and labor intensive. Remote sensing provides an alternative method to obtain repeated, rapid and inexpensive estimates of FPAR over large areas. LiDAR is an active remote sensing technology and can be used to extract accurate canopy structure parameters. A method to estimating FPAR of maize from airborne discrete-return LiDAR data was developed and tested in this study. The raw LiDAR point clouds were processed to separate ground returns from vegetation returns using a filter method over a maize field in the Heihe River Basin, northwest China. The fractional cover (fCover) of maize canopy was computed using the ratio of canopy return counts or intensity sums to the total of returns or intensities. FPAR estimation models were established based on linear regression analysis between the LiDAR-derived fCover and the field-measured FPAR (R-2 = 0.90, RMSE = 0.032, p < 0.001). The reliability of the constructed regression model was assessed using the leave-one-out cross-validation procedure and results show that the regression model is not overfitting the data and has a good generalization capability. Finally, 15 independent field-measured FPARs were used to evaluate accuracy of the LiDAR-predicted FPARs and results show that the LiDAR-predicted FPAR has a high accuracy ( R-2 = 0.89, RMSE = 0.034). In summary, this study suggests that the airborne discrete-return LiDAR data could be adopted to accurately estimate FPAR of maize. (C)2014 Optical Society of America

DOI:
10.1364/OE.22.005106

ISSN:
1094-4087